Louver Type Smoke Vent for Efficient Smoke Exhaust

Louver Type Smoke Vents are stylish yet practical tools in fire safety. Fires are frightening, but the real danger often lies in the smoke. These vents are here to help.
Imagine a building in flames, thick smoke everywhere. Louver Type Smoke Vents open automatically in such crises. Their stylish design allows smoke out, providing safe evacuation routes.
Smoke can be deadlier than fire, as it depletes oxygen and carries toxic fumes. In the absence of Louver Type Smoke Vents buildings could become hazardous.
The vents blend functionality and form, adding to the appearance of a building while controlling smoke during fires. They make sure that if fires do occur, the smoke is dealt with swiftly.

The louver vent can be configured to open in a specific sequence, creating a natural draft that draws smoke and hot air out of the building. Geometric Steels ventilator is supplied with wind deflectors to protect them from the effects of wind ensuring their aerodynamic efficiency. The colour choice: The casing is made of corrosion-resistant aluminium alloy that can be coated with powder coating to any standard RAL colour at an extra cost

The louver vent can be configured to open in a specific sequence, creating a natural draft that draws smoke and hot air out of the building. Geometric Steels ventilator is supplied with wind deflectors to protect them from the effects of wind ensuring their aerodynamic efficiency. COLOUR CHOICE The casing is made from corrosion-resistant aluminum alloy, which can be powder coated to any standard RAL colour for an additional cost Louver vents are installed on the roof or vertical/cladding section as per the need and with an arrangement of fixings according to the requirements of construction features the SMOKE louver ventilation is comprised of a frame constructed from aluminum comprised of alloy and a number of pivoting, aerodynamically shaped louvers corresponding to the size. For the infill of the louvers, you can choose between aluminum and Polycarbonate. The louvers can be opened or closed using the internal pneumatic actuator, cylinder or a pressure spring trigger system (DFA drive). The louver pivots are constructed from aluminum and then encased within UV-resistant nylon bushes. The sealing brushes or EPDM seals limit the flow of hot air an absolute minimal.

Smoke can be deadlier than fire, as it depletes oxygen and carries toxic fumes. In the absence of Louver Type Smoke Vents Buildings can be dangerous.

They combine design and function, improving the appearance of a building while controlling smoke during fires. They make sure that if fires do occur, the smoke is dealt with swiftly.

The louver vent can be configured to open in a specific sequence, creating a natural draft that draws smoke and hot air out of the building. Geometric Steels ventilator is supplied with wind deflectors to protect them from the effects of wind ensuring their aerodynamic efficiency. Colour choice The casing is made of aluminium alloy that is corrosion resistant, and can be powder coated in any RAL colour at an extra cost

Louver vent can be installed on roof and vertical /cladding portion as per utilization with some fixing arrangement as per requirement Construction features The SMOKE louver vent is an aluminium frame made of alloy, as well as a variety of aerodynamically-shaped, pivoting louvers that are sized to match the. For the infill of the louvers, you can choose between aluminium and Polycarbonate. The louvers can be open and shut using an pneumatic actuator, cylinder or pressure spring trigger device (DFA drive). The louver pivots are made of aluminium and mounted in UV-resistant nylon bushes. Brushes that seal or EPDM seals cut down the outflow of hot air the minimal.